2021 46' WINTER CUSTOM WALKAROUND!! RARE OPPORTUNITY TO OWN A ONE-OF-A-KIND CUSTOM BOAT!! THIS IS THE ONLY ONE ON THE MARKET AND SHE IS AN ABSOLUTE GEM!!

NOT FOR SALE IN US WATERS. 

- Twin Caterpillar C12.9 (500 hours) 

Tower:

Tuna Tower with molded top 
Polished Pipe (2) Antenna Standoffs
Recessed Lights, Lumitec tricolor
Radar pod express style
Sliding teaser reel door with brackets & tracks for mounting reels 
Molded one-piece standing platform
Molded 2 in 1 LED spreader light Lumitec light pod
Molded single LED spreader light Lumitec light pod (4) all sides
Control box 53" w/ flush mounted compass
Paint top of control box satin Medium/Dark gray
Tower sunshade molded top welded antenna mounts
Tower seating
Rod holder polished welded to the rail behind hardtop (9)
Rod holder polished welded to aft legs (6)
Rod holder polished welded to front tower legs with access from the tower (2)
Rupp outriggers 32' double spreader solid back bar
Install Rupp outriggers mounted on hardtop
Rupp center rigger
LED Nav lights port, starboard, stern molded into the hardtop
Recessed lights tri-color tower sunshade
Recessed lights tri-color platform
Molded fold-down Display aft for viewing from the cockpit
(2) 50 W Solar panels integrated into the hardtop
(4) 7" JL Audio speakers in hardtop
(2) 4" JL Audio speakers in the tower

Bridge Deck:

Helm forward and starboard adjusted on the bulkhead

Dash space for electronics equipment (Dual 19" screens)

Recessed electronics dash with Glass cover and supports

6" Compass mount (Ritchie Super Sport)

A/C at console and companion seat via (2) 12,000 BTU Cruisair 

A/C in face of dodger facing aft towards forward facing mezzanine seating 10, 00O BTU UNIT

Offset cabin access with sliding access door (Sliding door Teak)

2- Release Marine* Contour series: Teak ladder (Buckskin Ultra Leather cushions) with Foot rests and covers

Drink holders in the console at the helm

Teak helm pod

Mirrored combination mezzanine and deck seating

Refrigerated boxes in the mezzanine with individual thermostat control (2)

Freezer boxes between mezzanine and deck seating with individual thermostat controls /2

All boxes are insulated to maintain ice in designated "Drink" boxes

L-Shaped seating with dry storage within

Engine room Access through the mezzanine and bridge deck

Gaff storage in aft engine room access

Custom tackle storage under aft mezzanine seating

Tow Package:

WIFI Network Extender for connection to C-Zone up to 350
Custom SS towing eye
Main shaft locks
Oversized bilge pumps in the engine room
Warning beacon light on top of the tower to indicate bilge pump operation
Cockpit scupper flaps to prevent backflow of water into the vessel

Engine Room:

2- CAT C-12.9 Engine w. electronic controls (24v)
VCAT I" CMD color engine displays at the helm in fixed overhead box
Seakeeper 6 Gyro Stabilizer
Sundown insulation where applicable
SeaStar electronic power steering
Side Power bow thruster
Side-mounted "Palm Beach" control handles and controls with bow thruster push buttons
Custom Painted white engines
Veem Propellers (1 set)
Prop speed running gear
Custom Stainless rudders
1-Onan 13.5kw Generator
Aluminum stringer caps
230V Headhunter Stingray pump (fresh) GRUNOFUS 230 VAC PUmP
Headhunter 24V slat water pump
170V and 24V engine room lighting
1-Newmar battery charger 60 amp 24V 3-Bank
Dual Racor fuel filters for each engine with Racor primer pump
Single Racor on generator
8-Northstar Group 31 AGM Batteries
24V Bilge pumps with high water alarms
Sea strainer on genset
Tank sender on the tank
Fireboy halon fire control system and engine shut down
Seacocks on all thru hulls painted white
V FRP thru-hulls above waterline
Dometic SeaXchange 1200Z with remote display
Dometic KRA 450 Refrigeration System
ICE SEA 900 Chipper
Hot water heater (15 gallons)
150-gallon fresh water tank
Dometic freshwater flush head with holding tank
800 gal fuel capacity in the cockpit (1 Tank Fwd, 1 Tank aft) 
15 gal holding tank with macerator pump and pump out access
5 gal Sump box
50 amp 240V service
1-50 amp outlet in cockpit concealed behind the access door
Custom Paneltronics panels
(C-Zone Control System on DC Systems ExTEDEO
Electrical panel will include: 240V, 120V and 24 DC
4-Underwater lights in Transom (Lumishore)

Hull Construction:

Bottom:

2-Layers ½" marine grade Okume plywood
1-layer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy
2-layer 1708 Vectorply biaxial fiberglass on keel and chine
1-layer 1708 Vectorply biaxial fiberglass inside bottom-up through hull side
Laminated Douglas Fir stringers

Hull Sides:

Hull side 2 layers 6mm Okume plywood Loyds type 1088
1-layer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
Laminated Douglas fir rib bands
Laminated Douglas Fir chine
Laminated Douglas Fir sheer clamp

Bilge:

All bilges, engine room, and equipment are faired and painted with Alexseal Cloud White
Walk Around Construction
1- layer 1" Diab A500 foam on the cabin
2-layer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
All exterior surfaces
A build-up of Alexseal fairing products followed by Alexseal primer to a finished surface
- Topsides: Cloud white Alexseal
- Hull: STARS AND STRIPES 
- Boot Stripe: ALEXSEAL METALLIC

 

WE WILL CONSIDER ALL TRADES AND CAN ASSIST WITH FINANCING. 

Default
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.